
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)

.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)




Twin turbo pipe is modified, to help with turbo shuffle and responce. Too slow responce on the car and the hoosier tires will provide too much grip for the horse power....so we also put adjustable cam pullies on the normal cams, to allow us to adjust the normal cam timing :)
ツインターボパイプにもちょこっとお仕事♪hoosierの強大なグリップによるロスを少しでも減らすために?(ちょっとだけ、気持だけ・・・)

午後四時、ピットは戦場だ!社長を先頭にHKSハイデッキエンジンからノーマルRB26エンジンに乗せ換えです。
それというのも、どんだけRB26が持ってるポテンシャルを、ブーストアップのみで引き出すことができるか。に重点を置いたセッティングにするからなのです!!
スペックは以下参照。


This is space plate and cylinder liners, water jackets are filled with cement, for block strength.
The belt failed on the car as you may have previously read, so we changed the belt for the uprated ones, and went out again! パワステベルトが切れるという惨事に泣きつつも、
This is from the cars fitst ever outing, many people racing, some good rubber was layed down, and on a non prepped track, we got a 60ft of 1.471...then the belt broke..
This, our first run of the day.....no other cars were racing, just 2 drag GTRs. So we have no rubber layed down and on a cold day, with track temp under 10degrees. With 1.7bar on the T88-38gk turbo, we could only manage a 1.743 60ft.....Sugino san said the Buddy club suspension we were using should not be used anymore, as just too dangerous at top speed, he then commented as he got into 3rd, and bogged down, the car tried to steer into the timing equipment which is located in the centre of the track!!! So a slight let off on the throttle, then straighten up, then back on still gave us a 9.719sec run @ 245kmh
Then when back in the pits, we made some adjustments to 4wd controller, and upped the boost to 2.0kgm. 4wd controller allowed us to post a 1.501 60ft time, which is respectable considering the conditions on the day, then buddy club suspension also caused us issues in this run, almost sending Sugino san into barrier. He said he slightly let off straightened her up, and powered through with a 9.437 @ 243kmh.....which he was happy with considering the run.
The we tried 2.3bar boost, it was around 1 hour between the last run, we just couldnt keep traction, and Sugino san let off and rolled through the line with a 9.9sec time....

And then a nice sunset, and roll on 2009.....where we have some new parts, and new equipment to test :)
飛行機雲と一緒のいい写真が撮れましたので♪来年も試したいパーツや装備が盛りだくさんです!!



Base car stripped and seem welded
Re-painted in Nissan Silver (Z-tune colour)
1989 block
Step 3 full counter crank
H beam conrods
87mm pistons
endless crank cap bolts
ATI crank damper
7500cc endless oil pan
1.2mm metal head gasket
Squish area removed from head
combustion chamber adjusted so all the same size
compustion chamber polished
Intake ports enlarged
Intake ports polished
shim adjusted
272/272 cams
valve springs uprated
adjustable cam pullies
720cc injectors
fuel delivery pipe
16 row Oil cooler
Endless-R fuel pressure regulator
T51Z turbos
Endless-R exhaust manifolds
Endless-R intake manifold
Trust 3 layer intercooler
Endless-R/TRUST hard pipe kit
Ganador titanium exhaust
HKS Fcon V PRO
HKS CAMP 2
R35 GTR 380mm brakes and calipers
R35 skyline rear brakes 340mm discs and calipers
Full ROBSON leather reamake
R34 GTR front seats
Endless-R dry carbon bonnet
R34 6 Speed transmission
Nismo coppermix twin clutch (lazy)
Nismo LSD
Endless-R quantum developed suspension
TE37 18" wheels
I am sure I have left things out.....but you get the idea, Its one hell of a street car with no tuning stone left unturned :) (well apart from a small few things but I will let rain pick and choose his next parts)
とても全部を書ききれたものではないですが、たっぷり贅沢な仕様です♪